13 min read
13 min read
The Drone Spectrum Stack
The Drone Spectrum Stack
Ari Rosner

On October 29, the FCC voted to let drones use the 800 MHz cellular band, a slice of radio frequency (RF) spectrum used by major cell carriers to transmit signals and provide phone service, for the first time.
Most drones today rely on the same frequency bands as your Wi-Fi (2.4 GHz and 5 GHz). These crowded bands weaken a drone’s connection to its controller and operator. The newly allowed 800 MHz band is different; unlike Wi-Fi bands, these signals travel farther and can pass through trees and walls. Because it’s already licensed for cell carriers, drones using these new bands won’t need to compete with Wi-Fi for connectivity.
This news is a good excuse to chat more about the bigger picture. This new FCC ruling means a drone today can utilize over a dozen slices of spectrum, from 72 MHz up to 64 GHz.
Why this law even existed
At street level, your phone talks to a handful of nearby towers, allowing carriers to easily reuse the same frequencies in towers a few miles apart. Lift that phone a few thousand feet and it can see dozens of towers at once, crossing several geographic markets and creating more potential for interference. The FCC's 1991 order said almost exactly this. An airborne handset has far more range than one on the ground and could interfere with systems in more than one market, leading to its ban.
Critically, the rule didn't say phones on planes, it said airborne. When drones showed up decades later, they inherited a ban written for phones.

In 2013 the FCC did try to lift the ban for passengers, but that proposal drew more than 1,400 comments, many from people who did not want to sit next to a phone call for five hours. The FCC later dropped the proposal in 2020.
What changed the FCC's mind? Didn't we just say that systems in this band at altitude would create a lot of interference?
What changed is the network. Modern cellular networks, starting with LTE in 3GPP Release 15 and continuing into 5G, can recognize an aerial device and manage the interference it causes. For the RF folks, Release 15 added height-triggered measurement reports (events H1 and H2, which fire when a device climbs above or drops below a set altitude), measurement events that only trigger once a configurable number of cells cross a threshold (a telltale sign of a device that can see too many towers), flight path reporting so the network can plan handovers ahead of time, a core network flag for aerial subscriptions, and uplink power control changes to keep airborne devices from swamping neighboring cells. 5G NR got its own version of this toolkit in Release 18.
Bottom line is that the FCC is now confident that carriers can handle airborne users in these bands without causing interference.
Refreshing the Drone Spectrum Stack
Now, with this change, what bands do drones have access to? Before we get into that rabbit hole, a quick refresher on what drones use spectrum for.
It's primarily for three things.

Command and Control (C2): the link that flies the vehicle. Typically low data rate, but it's critical that it maintains connectivity. Lose C2 and the drone can't take any new commands or feed data back to the pilot.
Payload: video, imagery, sensor data. High data rate. Ask a payload engineer how much bandwidth they want for the payload and the answer will always be "more".
Being Tracked: other people want to see the drone, through Remote ID broadcasts, radar, or RF sensing. Detection requires spectrum too. More on that later.
To summarize, C2 wants reliability and range, which points to lower frequencies, payload wants bandwidth, which points to wider channels at higher frequencies., and detection radar wants both resolution and range, but also needs to be careful not to interfere with other systems.
The Stack

Here are the bands, grouped by how drones actually use them.
Hobby and unlicensed, where most drones live
72 MHz: This is the original drone band, part of the FCC's Radio Control service, with channels reserved for model aircraft. No license is needed, but it's limited to non-commercial use and can't carry data. It's still on the books, though these days, it mostly serves the balsa wood crowd.
Amateur bands (420 to 450 MHz, 1240 to 1300 MHz, 5650 to 5925 MHz): a lot of FPV video and long-range control lives here, but only for pilots with a ham license and only for non-commercial flying. Analog FPV video transmitters often run above unlicensed power limits, which is why the license matters,. and the FCC does enforce this. In 2018, it proposed a $2.86 million fine against HobbyKing for selling uncertified drone video transmitters, some of which could tune into FAA radar frequencies, and the fine was upheld in 2020.
902 to 928 MHz: the long-range unlicensed band. Telemetry radios and long-range control links run here at up to 1 watt with frequency hopping, trading bandwidth for better range than 2.4 GHz. Federal airborne radars use the band too, so drones aren't alone in it.
2.4 and 5.8 GHz: this is where almost every drone you can buy does its flying. There's no license, no fees, and no coordination, but also no protection. You share these bands with Wi-Fi, Bluetooth, baby monitors and, at 2.4 GHz, every microwave oven in America. In April, the FCC said these bands may be susceptible to interference and asked whether they're still viable for drones.
Remote ID: since 2023, most drones in the US have had to broadcast an electronic license plate. The FAA requires that broadcast to go out on unlicensed spectrum, which in practice means Bluetooth or Wi-Fi at 2.4 GHz and 5 GHz. Anyone with the right phone app can read it.
6 GHz: the newest Wi-Fi band, and the one unlicensed band where drones were explicitly told no. FCC rules prohibit using any 6 GHz unlicensed device, from indoor routers to very low power gadgets, to control or communicate with a drone.
Carrier Networks
700 MHz and PCS (1.9 GHz): these bands never had an airborne ban, and drones already fly on carrier LTE networks here. That's why some people argue the 800 MHz order adds capacity more than it unlocks anything new.
800 MHz cellular, the new one: 824 to 849 MHz and 869 to 894 MHz. That's 50 MHz of low-band spectrum, the kind that travels far and gets through trees and walls. The October order opens it to drone C2, comms, and payload. It's worth noting that the order adds an exemption for uncrewed aircraft rather than repealing the 1991 rule, so the passenger ban stays in place.
Two other details stand out. First, the FCC set no altitude or power limits. Zipline asked for reduced-power rules and the FCC declined, choosing to trust the carriers' networks to manage interference.
Second, the final order picked up a footnote the draft didn't have. SpaceX has applied to take over former T-Mobile licenses in part of this band, likely for direct-to-device satellite service, and the FCC wrote that it expects drones to coexist with that. Therefore, the same 800 MHz band may soon carry towers on the ground, drones in the middle, and satellites overhead. That's a crowded band.

The bans that are left: 800 MHz was the most famous airborne ban, but it wasn't the only one. FCC rules still keep airborne devices out of CBRS (3.55 to 3.7 GHz), the 2.5 GHz band, the 3.45 GHz band, C-band at 3.7 GHz, WCS at 2.3 GHz, the 1.4 GHz and 1670 to 1675 MHz bands, and 4.9 GHz public safety. The FCC asked about most of these in April. Oddly, 3.45 GHz didn't make the list.
Public safety: the 700 MHz public safety band reserves 16 channel pairs for low-altitude air-ground use, below 1,500 feet at 2 watts, which is handy for a police or fire drone.
Aviation and Dedicated Drone Bands
Aviation VHF (118 to 137 MHz): the band pilots use to talk to air traffic control. The FCC proposed in 2023 to license remote drone pilots to use it from the ground, and asked about it again in April. It's still pending.
450 MHz: for years this sliver at 454 and 459 MHz carried voice calls for private planes. One company, AURA, holds it at 53 sites. On November 19, the FCC is scheduled to vote on a new aviation safety allocation along with a single nationwide license pitched mainly for drone control links, with no auction. It's only 650 kHz in total. That's enough to fly a drone, but not enough to stream its video.
960 to 1164 MHz: this is home to navigation beacons, transponder replies at 1030 and 1090 MHz, and ADS-B, the position broadcast planes send on 1090 and 978 MHz. In 2020 the FCC declined to open it to drone control links, and in April they asked the public whether to reconsider. Meanwhile, the FAA bars most small drones from transmitting ADS-B at all.
5030 to 5091 MHz: this is the only US band whose rules were written specifically for drone control links. The FCC adopted them in August 2024. Operators could request a frequency for a specific time and place through a Dynamic Frequency Management System, an automated service modeled on CBRS, with each assignment lasting up to 24 hours. The first block is 10 MHz at 5040 to 5050 MHz. So why isn't anyone using it? The sections of the rules that let operators actually access the band, including the interim access path, are still marked "delayed indefinitely" in the Code of Federal Regulations. Two years in, no frequency management system has been approved.
Satellite
L-band (around 1.6 GHz): satellite systems like Iridium already carry control links for drones flying beyond cell coverage. Data rates are low, but the antennas are small and the coverage is global.
Ku and Ka bands: these carry the satellite links behind big military drones and in-flight Wi-Fi. The FCC's rules for satellite terminals on aircraft don't distinguish between crewed and uncrewed.
28.35 to 28.6 GHz: Low-Earth-orbit terminals on moving vehicles can already use most of this band. On November 19 the FCC is scheduled to vote on opening the last 50 MHz, at 28.35 to 28.4 GHz, and the FCC's own fact sheet lists drones among the beneficiaries.
Navigation and Sensors
GPS (1176, 1227 and 1575 MHz): receive only, but every drone that navigates by satellite depends on it.
60 GHz: drones can carry small radars at 60 to 64 GHz for sensing and obstacle avoidance, with a power cap and a 400-foot ceiling.
76 to 81 GHz: this is the radar band your car uses. Aircraft-mounted radars here are allowed for ground use only, which rules them out in flight.
Ultra-wideband: prohibited on aircraft entirely.
Flight test and military
Two telemetry bands, 1435 to 1525 MHz and parts of 2.3 GHz, carry flight test data, and the rules for the first one specifically name "manned or unmanned aircraft." Military drones run on federal spectrum managed by NTIA, including C-band data links between 4.4 and 4.94 GHz and Ku-band satellite links. That's a whole other map, and maybe a future post.
Detecting drones needs spectrum too
Every drone flight raises a second question. Who else is up there?
Ground radar is one of the best ways to find small drones, and since radar is (usually) a transmitter, it needs spectrum. Detection radars already run in a few licensed radiolocation bands, including X-band around 9 GHz and Ku-band around 16 GHz. The newest candidate is 24 GHz.
Echodyne petitioned the FCC for 24 GHz drone-detection spectrum on October 24, 2018. While that sat, the FCC let radars run on waivers, first in 2019 and extended in June 2024, when MatrixSpace got a waiver too. On November 19, the FCC is scheduled to vote on adding 200 MHz at 24.45 to 24.65 GHz for radiolocation, federal and non-federal. It would be a secondary allocation, licensed and ground-based only.
Radar isn't the only way to look. Passive RF sensors listen for the drone's own signals on 900 MHz, 2.4 GHz, 5.8 GHz, and Remote ID, and you don't need a license to listen, but federal agencies have warned that sensors which intercept the content of drone communications can run into federal wiretap laws.
Finding a drone is the easy part. Stopping one is harder, at least legally. Jamming runs into Section 333 of the Communications Act, which bars willful interference with licensed radio. That changed this year, at least for some. The SAFER SKIES Act, passed in the December 2025 defense bill, gave state and local police authority to detect and mitigate drones through 2031. Mitigation requires FBI training and certification. DOJ and DHS rules took effect July 1, 2026. A day later, the FCC ruled that covered state and local jamming doesn't violate Section 333 so a certified police department can now jam a drone; your neighbor still can't.
The military has a different set of rules. On ranges, the services can jam GPS and communications, and the FAA warns pilots ahead of time when those exercises might spill into nearby airspace. Outside the ranges, Title 10, Section 130i has given DoW a framework for counter-drone authority since 2016. It lets the department detect, track, take control of, disrupt or destroy drones that threaten designated facilities and assets, like those tied to nuclear deterrence, missile defense, and national security. There's a lot more to say there, so maybe we'll cover it in another post.

What's still missing
Spectrum is only one piece. Routine flights beyond visual line of sight still need the FAA's Part 108 rule.
One detail in the proposed rule matters a lot for this map. It would bar unlicensed control links for the higher-risk categories of flight. If that survives, the serious end of the drone industry moves off 2.4 and 5.8 GHz and onto licensed spectrum like 800 MHz, 450 MHz and, eventually, 5030 MHz.
Drones now have more ways to talk than ever, but they still need permission to fly far enough to use them.

In 1991 the FCC was worried about one phone reaching too many towers. In 2026 it's sorting out towers, drones, and satellites in the same spectrum. The physics didn't change, the demand for spectrum continued to increase, and modern technology helped the different systems coexist.
On October 29, the FCC voted to let drones use the 800 MHz cellular band, a slice of radio frequency (RF) spectrum used by major cell carriers to transmit signals and provide phone service, for the first time.
Most drones today rely on the same frequency bands as your Wi-Fi (2.4 GHz and 5 GHz). These crowded bands weaken a drone’s connection to its controller and operator. The newly allowed 800 MHz band is different; unlike Wi-Fi bands, these signals travel farther and can pass through trees and walls. Because it’s already licensed for cell carriers, drones using these new bands won’t need to compete with Wi-Fi for connectivity.
This news is a good excuse to chat more about the bigger picture. This new FCC ruling means a drone today can utilize over a dozen slices of spectrum, from 72 MHz up to 64 GHz.
Why this law even existed
At street level, your phone talks to a handful of nearby towers, allowing carriers to easily reuse the same frequencies in towers a few miles apart. Lift that phone a few thousand feet and it can see dozens of towers at once, crossing several geographic markets and creating more potential for interference. The FCC's 1991 order said almost exactly this. An airborne handset has far more range than one on the ground and could interfere with systems in more than one market, leading to its ban.
Critically, the rule didn't say phones on planes, it said airborne. When drones showed up decades later, they inherited a ban written for phones.

In 2013 the FCC did try to lift the ban for passengers, but that proposal drew more than 1,400 comments, many from people who did not want to sit next to a phone call for five hours. The FCC later dropped the proposal in 2020.
What changed the FCC's mind? Didn't we just say that systems in this band at altitude would create a lot of interference?
What changed is the network. Modern cellular networks, starting with LTE in 3GPP Release 15 and continuing into 5G, can recognize an aerial device and manage the interference it causes. For the RF folks, Release 15 added height-triggered measurement reports (events H1 and H2, which fire when a device climbs above or drops below a set altitude), measurement events that only trigger once a configurable number of cells cross a threshold (a telltale sign of a device that can see too many towers), flight path reporting so the network can plan handovers ahead of time, a core network flag for aerial subscriptions, and uplink power control changes to keep airborne devices from swamping neighboring cells. 5G NR got its own version of this toolkit in Release 18.
Bottom line is that the FCC is now confident that carriers can handle airborne users in these bands without causing interference.
Refreshing the Drone Spectrum Stack
Now, with this change, what bands do drones have access to? Before we get into that rabbit hole, a quick refresher on what drones use spectrum for.
It's primarily for three things.

Command and Control (C2): the link that flies the vehicle. Typically low data rate, but it's critical that it maintains connectivity. Lose C2 and the drone can't take any new commands or feed data back to the pilot.
Payload: video, imagery, sensor data. High data rate. Ask a payload engineer how much bandwidth they want for the payload and the answer will always be "more".
Being Tracked: other people want to see the drone, through Remote ID broadcasts, radar, or RF sensing. Detection requires spectrum too. More on that later.
To summarize, C2 wants reliability and range, which points to lower frequencies, payload wants bandwidth, which points to wider channels at higher frequencies., and detection radar wants both resolution and range, but also needs to be careful not to interfere with other systems.
The Stack

Here are the bands, grouped by how drones actually use them.
Hobby and unlicensed, where most drones live
72 MHz: This is the original drone band, part of the FCC's Radio Control service, with channels reserved for model aircraft. No license is needed, but it's limited to non-commercial use and can't carry data. It's still on the books, though these days, it mostly serves the balsa wood crowd.
Amateur bands (420 to 450 MHz, 1240 to 1300 MHz, 5650 to 5925 MHz): a lot of FPV video and long-range control lives here, but only for pilots with a ham license and only for non-commercial flying. Analog FPV video transmitters often run above unlicensed power limits, which is why the license matters,. and the FCC does enforce this. In 2018, it proposed a $2.86 million fine against HobbyKing for selling uncertified drone video transmitters, some of which could tune into FAA radar frequencies, and the fine was upheld in 2020.
902 to 928 MHz: the long-range unlicensed band. Telemetry radios and long-range control links run here at up to 1 watt with frequency hopping, trading bandwidth for better range than 2.4 GHz. Federal airborne radars use the band too, so drones aren't alone in it.
2.4 and 5.8 GHz: this is where almost every drone you can buy does its flying. There's no license, no fees, and no coordination, but also no protection. You share these bands with Wi-Fi, Bluetooth, baby monitors and, at 2.4 GHz, every microwave oven in America. In April, the FCC said these bands may be susceptible to interference and asked whether they're still viable for drones.
Remote ID: since 2023, most drones in the US have had to broadcast an electronic license plate. The FAA requires that broadcast to go out on unlicensed spectrum, which in practice means Bluetooth or Wi-Fi at 2.4 GHz and 5 GHz. Anyone with the right phone app can read it.
6 GHz: the newest Wi-Fi band, and the one unlicensed band where drones were explicitly told no. FCC rules prohibit using any 6 GHz unlicensed device, from indoor routers to very low power gadgets, to control or communicate with a drone.
Carrier Networks
700 MHz and PCS (1.9 GHz): these bands never had an airborne ban, and drones already fly on carrier LTE networks here. That's why some people argue the 800 MHz order adds capacity more than it unlocks anything new.
800 MHz cellular, the new one: 824 to 849 MHz and 869 to 894 MHz. That's 50 MHz of low-band spectrum, the kind that travels far and gets through trees and walls. The October order opens it to drone C2, comms, and payload. It's worth noting that the order adds an exemption for uncrewed aircraft rather than repealing the 1991 rule, so the passenger ban stays in place.
Two other details stand out. First, the FCC set no altitude or power limits. Zipline asked for reduced-power rules and the FCC declined, choosing to trust the carriers' networks to manage interference.
Second, the final order picked up a footnote the draft didn't have. SpaceX has applied to take over former T-Mobile licenses in part of this band, likely for direct-to-device satellite service, and the FCC wrote that it expects drones to coexist with that. Therefore, the same 800 MHz band may soon carry towers on the ground, drones in the middle, and satellites overhead. That's a crowded band.

The bans that are left: 800 MHz was the most famous airborne ban, but it wasn't the only one. FCC rules still keep airborne devices out of CBRS (3.55 to 3.7 GHz), the 2.5 GHz band, the 3.45 GHz band, C-band at 3.7 GHz, WCS at 2.3 GHz, the 1.4 GHz and 1670 to 1675 MHz bands, and 4.9 GHz public safety. The FCC asked about most of these in April. Oddly, 3.45 GHz didn't make the list.
Public safety: the 700 MHz public safety band reserves 16 channel pairs for low-altitude air-ground use, below 1,500 feet at 2 watts, which is handy for a police or fire drone.
Aviation and Dedicated Drone Bands
Aviation VHF (118 to 137 MHz): the band pilots use to talk to air traffic control. The FCC proposed in 2023 to license remote drone pilots to use it from the ground, and asked about it again in April. It's still pending.
450 MHz: for years this sliver at 454 and 459 MHz carried voice calls for private planes. One company, AURA, holds it at 53 sites. On November 19, the FCC is scheduled to vote on a new aviation safety allocation along with a single nationwide license pitched mainly for drone control links, with no auction. It's only 650 kHz in total. That's enough to fly a drone, but not enough to stream its video.
960 to 1164 MHz: this is home to navigation beacons, transponder replies at 1030 and 1090 MHz, and ADS-B, the position broadcast planes send on 1090 and 978 MHz. In 2020 the FCC declined to open it to drone control links, and in April they asked the public whether to reconsider. Meanwhile, the FAA bars most small drones from transmitting ADS-B at all.
5030 to 5091 MHz: this is the only US band whose rules were written specifically for drone control links. The FCC adopted them in August 2024. Operators could request a frequency for a specific time and place through a Dynamic Frequency Management System, an automated service modeled on CBRS, with each assignment lasting up to 24 hours. The first block is 10 MHz at 5040 to 5050 MHz. So why isn't anyone using it? The sections of the rules that let operators actually access the band, including the interim access path, are still marked "delayed indefinitely" in the Code of Federal Regulations. Two years in, no frequency management system has been approved.
Satellite
L-band (around 1.6 GHz): satellite systems like Iridium already carry control links for drones flying beyond cell coverage. Data rates are low, but the antennas are small and the coverage is global.
Ku and Ka bands: these carry the satellite links behind big military drones and in-flight Wi-Fi. The FCC's rules for satellite terminals on aircraft don't distinguish between crewed and uncrewed.
28.35 to 28.6 GHz: Low-Earth-orbit terminals on moving vehicles can already use most of this band. On November 19 the FCC is scheduled to vote on opening the last 50 MHz, at 28.35 to 28.4 GHz, and the FCC's own fact sheet lists drones among the beneficiaries.
Navigation and Sensors
GPS (1176, 1227 and 1575 MHz): receive only, but every drone that navigates by satellite depends on it.
60 GHz: drones can carry small radars at 60 to 64 GHz for sensing and obstacle avoidance, with a power cap and a 400-foot ceiling.
76 to 81 GHz: this is the radar band your car uses. Aircraft-mounted radars here are allowed for ground use only, which rules them out in flight.
Ultra-wideband: prohibited on aircraft entirely.
Flight test and military
Two telemetry bands, 1435 to 1525 MHz and parts of 2.3 GHz, carry flight test data, and the rules for the first one specifically name "manned or unmanned aircraft." Military drones run on federal spectrum managed by NTIA, including C-band data links between 4.4 and 4.94 GHz and Ku-band satellite links. That's a whole other map, and maybe a future post.
Detecting drones needs spectrum too
Every drone flight raises a second question. Who else is up there?
Ground radar is one of the best ways to find small drones, and since radar is (usually) a transmitter, it needs spectrum. Detection radars already run in a few licensed radiolocation bands, including X-band around 9 GHz and Ku-band around 16 GHz. The newest candidate is 24 GHz.
Echodyne petitioned the FCC for 24 GHz drone-detection spectrum on October 24, 2018. While that sat, the FCC let radars run on waivers, first in 2019 and extended in June 2024, when MatrixSpace got a waiver too. On November 19, the FCC is scheduled to vote on adding 200 MHz at 24.45 to 24.65 GHz for radiolocation, federal and non-federal. It would be a secondary allocation, licensed and ground-based only.
Radar isn't the only way to look. Passive RF sensors listen for the drone's own signals on 900 MHz, 2.4 GHz, 5.8 GHz, and Remote ID, and you don't need a license to listen, but federal agencies have warned that sensors which intercept the content of drone communications can run into federal wiretap laws.
Finding a drone is the easy part. Stopping one is harder, at least legally. Jamming runs into Section 333 of the Communications Act, which bars willful interference with licensed radio. That changed this year, at least for some. The SAFER SKIES Act, passed in the December 2025 defense bill, gave state and local police authority to detect and mitigate drones through 2031. Mitigation requires FBI training and certification. DOJ and DHS rules took effect July 1, 2026. A day later, the FCC ruled that covered state and local jamming doesn't violate Section 333 so a certified police department can now jam a drone; your neighbor still can't.
The military has a different set of rules. On ranges, the services can jam GPS and communications, and the FAA warns pilots ahead of time when those exercises might spill into nearby airspace. Outside the ranges, Title 10, Section 130i has given DoW a framework for counter-drone authority since 2016. It lets the department detect, track, take control of, disrupt or destroy drones that threaten designated facilities and assets, like those tied to nuclear deterrence, missile defense, and national security. There's a lot more to say there, so maybe we'll cover it in another post.

What's still missing
Spectrum is only one piece. Routine flights beyond visual line of sight still need the FAA's Part 108 rule.
One detail in the proposed rule matters a lot for this map. It would bar unlicensed control links for the higher-risk categories of flight. If that survives, the serious end of the drone industry moves off 2.4 and 5.8 GHz and onto licensed spectrum like 800 MHz, 450 MHz and, eventually, 5030 MHz.
Drones now have more ways to talk than ever, but they still need permission to fly far enough to use them.

In 1991 the FCC was worried about one phone reaching too many towers. In 2026 it's sorting out towers, drones, and satellites in the same spectrum. The physics didn't change, the demand for spectrum continued to increase, and modern technology helped the different systems coexist.
CONTACT
Dana Chou,
20:50
New York, NY. Proudly made in 🇺🇸
© 2026 Airbase Intelligence, Inc. All Rights Reserved.

20:50
New York, NY. Proudly made in 🇺🇸
© 2026 Airbase Intelligence, Inc. All Rights Reserved.

20:50
New York, NY. Proudly made in 🇺🇸
© 2026 Airbase Intelligence, Inc. All Rights Reserved.
